RK3566 restaurant digital menu board Wide-Temp for Nigeria Buyers - Wholesale Restaurant and Hospita

September 30, 2026 supply note: Wanlin Group (Shenzhen, China) opened the RK3566-RH170 to Nigeria POS brand owners, self-service kiosk builders and private-label programme teams, Rockchip RK3566 quad-core SoC, 4GB LPDDR4X + 32GB eMMC, 11.6-inch eDP projected capacitive touch, Android 14.0 with OTA upgrade, Dual-band WiFi with Bluetooth 5.0, inside its 2026 Restaurant and Hospitality Payment Terminal Boards export program: 4GB LPDDR4X + 32GB eMMC, with restaurant counters and self-ordering kiosks where the board takes the order, splits the bill, prompts for the tip on a customer screen, prints the receipt and drives a kitchen display on the same network, built for the way Nigeria merchants and counter teams actually work. Wanlin Group as the smart payment terminal board supplier, exporter and original manufacturer now serves local partners, regional exclusive distributors and strategic OEM clients in more than 60 destination markets, and this export program is open to Nigeria buyers ordering at factory-direct terms.

Core parameters: Rockchip RK3566 quad-core SoC, 4x Cortex-A55 with an integrated NPU. CPU 4x ARM Cortex-A55 up to 1.8GHz, 64-bit architecture. GPU ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1. Render and security path Mali-G52 2EE render path with the on-chip NPU handling QR decode assist and lightweight face detection. Video decode Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@30fps encode for audit capture. Camera input MIPI CSI camera input for barcode imagers, face payment cameras and document capture. Memory and storage 4GB LPDDR4X + 32GB eMMC. Operating system Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher. Display and touch 11.6-inch 1920x1080 eDP panel with projected capacitive touch for self-service payment kiosks. Audio and signalling Speaker output with microphone input, voice prompt playback and a scan beep channel. Interfaces and I/O 1x MIPI DSI or LVDS display with capacitive touch, 1x HDMI secondary display, 1x MIPI CSI camera, 3x USB Host with 1x USB OTG, 1x RS232 with TTL UART option, 1x thermal printer head and cutter control, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion. Networking Dual-band WiFi with Bluetooth 5.0, 10/100M Ethernet and an optional 4G LTE module. Power input 12 V DC input with an onboard buck stage, a separate supply path for the thermal printer head, RTC retention and scheduled power on/off for unattended duty. Duty profile Continuous unattended duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for outdoor kiosks. PCB Smart payment terminal PCBA with onboard LPDDR and eMMC, display and touch interface, camera input, printer and scan-engine headers, SIM and TF card slots, Ethernet and a USB service path. Certifications CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support. Wanlin's 2026 export roadmap for Nigeria also covers custom memory and storage combos, printer and scan engine interface selection, contactless antenna placement, custom peripheral drivers, private-label branding and per-destination certification documentation packages.

Executive Summary - Restaurant and Hospitality Payment Terminal Boards Export for Global B2B Buyers

Executive summary - 10 buyer-relevant points:

• Featured model RK3566-RH170, Restaurant and Hospitality Payment Terminal Boards, Rockchip RK3566 quad-core SoC, 4x Cortex-A55 with an integrated NPU
• CPU 4x ARM Cortex-A55 up to 1.8GHz, 64-bit architecture
• GPU ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1
• Render and security path Mali-G52 2EE render path with the on-chip NPU handling QR decode assist and lightweight face detection
• Video decode Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@30fps encode for audit capture
• Memory and storage 4GB LPDDR4X + 32GB eMMC
• OS Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher
• Display and touch 11.6-inch 1920x1080 eDP panel with projected capacitive touch for self-service payment kiosks
• MOQ 100 pcs, lead time 15-22 days, FOB Shenzhen / CIF / EXW / DDP supported, 24 months warranty
• Field reference: bakery counter with queue number print - queue confusion complaints fell 92%
• Target buyer: restaurant chain operators, QSR equipment makers, hotel group procurement teams, food court integrators and hospitality POS brand owners
• Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

For sourcing managers evaluating Restaurant and Hospitality Payment Terminal Boards suppliers, the items below are the ones that normally decide the shortlist and hold up in later disputes. Wanlin Group operates its own 12,000 m2 manufacturing facility in Shenzhen with 8 SMT lines, 4 AOI inspection stations and 2,400 m2 of cleanroom assembly, exporting smart payment terminal boards to 60+ countries under the AndroidSBC brand. Total cost of ownership for an AndroidSBC Restaurant and Hospitality Payment Terminal Boards deployment typically runs 42-60% below x86-based cashier hardware once per-device OS licensing and patch handling are counted. For Nigeria, this article maps the model line, the economics and the compliance route specific to your market.

Global Restaurant and Hospitality Payment Terminal Boards Market Overview and 2026 Buyer Demand

Restaurant chains are buying payment hardware against labour scarcity rather than against feature lists. Self-ordering kiosks and tip-on-customer-screen flows are being specified because they remove a person from the counter, not because they are new.

Regional compliance for Nigeria is anchored on NCC type approval and SONCAP import conformity documentation. Cross-border buyers are advised to verify the certification scope, the contactless behaviour and the software build of every board before import, since some China-supplied boards ship without destination radio approval, without the payment documentation the acquirer asks for, or without the Android build the project actually needs, and any of those gaps can stall customs clearance or a scheme review.

Reference: Wanlin Group 2026 smart payment terminal export program documentation, Rockchip and Allwinner platform datasheets, field deployment records 2024-2026.

Restaurant and Hospitality Payment Terminal Boards Engineering Architecture and Hardware Platform

The smart payment terminal family is engineered on three pillars: (1) an Rockchip RK3566 quad-core SoC, 4x Cortex-A55 with an integrated NPU compute block with Mali-G52 2EE render path with the on-chip NPU handling QR decode assist and lightweight face detection; (2) a display and capture pipeline built around Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@30fps encode for audit capture; (3) a software layer pairing Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher with OTA tooling, device management and the Rockchip RK3566 Android BSP, AOSP build support, peripheral driver kit and the AndroidSBC SDK kit. This architecture delivers continuous counter and unattended duty at a cost point that undercuts cashier PCs while keeping the payment, print and scan response operators expect.

Three sub-modules define the engineering depth:

• Compute module - Rockchip RK3566 quad-core SoC, 4x Cortex-A55 with an integrated NPU. 4x ARM Cortex-A55 up to 1.8GHz, 64-bit architecture handles the tender flow, catalogue screens, signature capture and on-device vision work inside a fanless terminal shell.
• Display and capture module - 11.6-inch 1920x1080 eDP panel with projected capacitive touch for self-service payment kiosks. MIPI CSI camera input for barcode imagers, face payment cameras and document capture covers the camera input used for face payment, document capture and proof of purchase, so one device closes the transaction and records the evidence.
• Peripheral and management module - 1x MIPI DSI or LVDS display with capacitive touch, 1x HDMI secondary display, 1x MIPI CSI camera, 3x USB Host with 1x USB OTG, 1x RS232 with TTL UART option, 1x thermal printer head and cutter control, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion. Headless recovery is supported through the USB service path, and the toolchain covers Rockchip RK3566 Android BSP, AOSP build support, peripheral driver kit and the AndroidSBC SDK kit, OTA upgrade, boot animation customization, pre-installed app support and launcher customization for remote fleet management.

Mechanically the board is a Smart payment terminal PCBA with onboard LPDDR and eMMC, display and touch interface, camera input, printer and scan-engine headers, SIM and TF card slots, Ethernet and a USB service path, which is why it drops into countertop shells, kiosk housings and wall-mounted enclosures without a tooling change.

Featured Model - RK3566-RH170 Wide-Temp Technical Signature

The featured model is RK3566-RH170, part of the Restaurant and Hospitality Payment Terminal Boards family, configured in this batch with 4GB LPDDR4X memory and 32GB eMMC storage. FOB Shenzhen reference price is $90.00 per piece at MOQ 100 pcs, with bulk tier pricing from $77.40 to $100.80 depending on memory and storage combination, radio set, regional certification and packaging artwork. Lead time is 15-22 days from PO confirmation and 30% T/T deposit receipt, with a 24-month warranty.

The technical signature of RK3566-RH170 on this configuration is documented below. Every parameter is verified by our Shenzhen lab against the printer duty profile, the contactless read behaviour of the final enclosure and the electrical limits of IEC / UL 62368-1.

Specification	Value
soc_platform	Rockchip RK3566 quad-core SoC, 4x Cortex-A55 with an integrated NPU
cpu_core	4x ARM Cortex-A55 up to 1.8GHz, 64-bit architecture
gpu_3d	ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1
render_security_path	Mali-G52 2EE render path with the on-chip NPU handling QR decode assist and lightweight face detection
video_decode	Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@30fps encode for audit capture
camera_input	MIPI CSI camera input for barcode imagers, face payment cameras and document capture
memory_storage	4GB LPDDR4X + 32GB eMMC
os_android	Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher
display_touch	11.6-inch 1920x1080 eDP panel with projected capacitive touch for self-service payment kiosks
audio_signalling	Speaker output with microphone input, voice prompt playback and a scan beep channel
interfaces_io	1x MIPI DSI or LVDS display with capacitive touch, 1x HDMI secondary display, 1x MIPI CSI camera, 3x USB Host with 1x USB OTG, 1x RS232 with TTL UART option, 1x thermal printer head and cutter control, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion
networking	Dual-band WiFi with Bluetooth 5.0, 10/100M Ethernet and an optional 4G LTE module
power_input	12 V DC input with an onboard buck stage, a separate supply path for the thermal printer head, RTC retention and scheduled power on/off for unattended duty
duty_profile	Continuous unattended duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for outdoor kiosks
pcb_mechanics	Smart payment terminal PCBA with onboard LPDDR and eMMC, display and touch interface, camera input, printer and scan-engine headers, SIM and TF card slots, Ethernet and a USB service path
certifications	CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support
use_case	restaurant counters and self-ordering kiosks where the board takes the order, splits the bill, prompts for the tip on a customer screen, prints the receipt and drives a kitchen display on the same network

Restaurant and Hospitality Payment Terminal Boards Application Scenarios across Deployment Sites

Instead of restating features, the entries below report where Restaurant and Hospitality Payment Terminal Boards already work: the site, the fleet size and the figure that moved.

Scenario 1: bakery counter with queue number print (Seoul, South Korea). A bakery chain installed 420 counters where the receipt printer issues a queue number slip and the customer screen shows the number being served, with the camera recording the handover. Measured result: queue confusion complaints fell 92% and counter throughput rose 27% at peak.

Scenario 2: food court self-ordering with QR payment (Bangkok, Thailand). A food court operator placed 88 self-ordering kiosks where each stall appears on one menu, the customer pays by QR and the kitchen display receives the ticket on the same network. Measured result: order taking staff per court fell from 9 to 5 and average order value rose 21%.

Scenario 3: coffee drive-thru with customer screen (Vancouver, Canada). A coffee chain fitted 340 drive-thru lanes where the customer screen shows the order as it is built and the tip prompt appears before the card reader arms, with the receipt printed at the window. Measured result: order accuracy complaints fell 47% and tip capture rose 13 points.

Scenario 4: hotel front desk with pre-auth and incidentals (Lisbon, Portugal). A hotel group deployed 260 front desk terminals that take the check-in pre-authorisation, hold incidentals and settle the final bill on one board, printing a folio on the receipt path. Measured result: check-in handling time fell 34% and folio correction requests dropped 72%.

Scenario 5: canteen counter with offline meal card (Nairobi, Kenya). A corporate canteen operator fitted 160 terminals that validate a meal card offline and settle to the head end when the network returns, keeping service running through daily connectivity drops. Measured result: service stoppages fell to zero during outages and meal subsidy reconciliation closed 3 hours faster per week.

AndroidSBC Restaurant and Hospitality Payment Terminal Boards Competitive Advantages for Cross-Border Buyers

The smart payment terminal board and the wider AndroidSBC payment device portfolio deliver eight advantages for cross-border B2B buyers sourcing from Chinese manufacturers:

1. Source-factory pricing - Wanlin operates the SMT lines, so FOB Shenzhen pricing runs 42-60% below western-branded payment terminals with no per-device licence fee.
2. Tender coverage - QR, barcode, NFC contactless, EMV chip and magnetic stripe on one board, with secure boot, tamper inputs and key storage where the scheme asks for it.
3. Printer and scan integration - thermal receipt printer head and cutter control plus a scan engine UART on the board, so receipt and scan do not need a second controller.
4. Display coverage - a merchant channel and a customer channel on one board across LVDS, eDP, MIPI DSI and HDMI, which removes the pole display and its power supply from the kit.
5. Offline behaviour - transaction and scan queueing that posts when the signal returns, because the counters and kiosks that matter most are the ones where coverage fails.
6. Peripheral and service path - 1x MIPI DSI or LVDS display with capacitive touch, 1x HDMI secondary display, 1x MIPI CSI camera, 3x USB Host with 1x USB OTG, 1x RS232 with TTL UART option, 1x thermal printer head and cutter control, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion, covering printer, scanner, camera, RFID, SIM and TF, GPIO, RS232, RS485 and serial expansion, plus a USB service port for field recovery.
7. Multi-OS flexibility - Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher, so GMS devices, AOSP payment builds and private-label launcher programmes run on one board.
8. Unattended reliability - hardware watchdog, RTC retention, scheduled power on and off, auto power on after a mains cut and OTA with a canary ring.

Combined, these advantages let AndroidSBC partners win retail, banking, transport and private-label programmes, secure regional distribution rights, and serve end customers under their own brand at a landed cost 35-45% below legacy suppliers.

Restaurant and Hospitality Payment Terminal Boards Certifications, Electrical Performance and Assembly Notes

The RK3566-RH170 carries CE / FCC / RoHS / REACH as standard scope. Optional add-on documentation available on request includes UKCA, KC, PSE, SAA, RCM and EAC packs, country-specific declaration templates and UL 62368-1 test reports. All boards are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch. For payment projects we support the documentation set that scheme certification asks for, including secure boot configuration, tamper response and key handling notes.

Electrical performance is characterised against the final enclosure: 12 V DC input with an onboard buck stage, a separate supply path for the thermal printer head, RTC retention and scheduled power on/off for unattended duty, with the printer head supplied on its own power path and the contactless antenna tuned with the shell closed. The board is specified for Continuous unattended duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for outdoor kiosks, which covers countertop shells, kiosk housings and wall-mounted enclosures with no fan and no vent.

Assembly and integration notes every integration team should run through before closing an enclosure:

• Budget the thermal printer head supply as a separate power path with its own bulk capacitance, because the head draws a sharp current pulse on each printed line and will brown out the logic rail if it shares it
• Route the LVDS or eDP flex away from the printer harness and the mains entry, and keep it inside the bend radius drawn for the connector, since display noise shows up as flicker only after the enclosure is closed
• Place the contactless antenna away from the printer mechanism, the shielding can and any metal bracket, then tune it with the final enclosure closed, because detuning appears as read failures at the counter rather than in the lab
• Configure secure boot, the tamper detection inputs and key storage before the security review, since payment schemes ask for the key handling description and the tamper response during certification rather than after
• Bond the shielding can to chassis ground at the points drawn on the carrier and keep the Ethernet transformer side of the board free of signal copper, since EMC failures at the test house usually trace back to a floating can
• Support the PCBA on all screw bosses and keep it flat in the housing, because a flexed board cracks BGA joints under transport vibration and the failure surfaces weeks later in the field
• Give the USB service port ESD protection on the data lines and keep it reachable without opening the payment compartment, because tamper-evident seals mean a sealed unit can no longer be recovered on site

Cross-border buyers should note that payment terminal compliance combines product marking, radio certification, safety evaluation and the scheme documentation the acquirer asks for. For Nigeria specifically, importers should confirm NCC type approval and SONCAP import conformity documentation before shipment. Wanlin provides a pre-validated compliance package per model with DoC templates, test report copies and label artwork, reducing importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

Restaurant and Hospitality Payment Terminal Boards Economics, MOQ, Lead Time and Logistics Math

For a first-time buyer ordering 1,000 pieces of the RK3566-RH170, the economics stack is:

Cost Layer	USD per piece	USD for 1000 pcs
FOB Shenzhen factory price	$90.00	$90000.00
+ Sea freight FCL 40HQ (estimated)	$2.10	$2100.00
CIF destination port	$92.10	$92100.00
+ Customs duty 3%-10% (region dependent)	$0.64	$637.10
+ Local delivery + warehousing	$3.80	$3800.00
DDP landed cost	$96.54	$96540.00

Sample order cost is USD 60 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term; L/C at sight is accepted for orders above USD 80,000. Production lead time is 15-22 days, warranty is 24 months, and free DOA replacement applies within 60 days of receipt.

Restaurant and Hospitality Payment Terminal Boards FAQ - OEM, ODM, MOQ, Lead Time, Partnership

Below are eight frequently asked questions from cross-border buyers sourcing smart payment terminal boards from China. Each answer is anchored on Wanlin's commercial terms, certification scope and field experience across 60+ export markets under the AndroidSBC brand.

What is the difference between OEM and ODM for Restaurant and Hospitality Payment Terminal Boards?

Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the board, the payment terminal or the finished device under your brand with your PCB silk-screen, logo, packaging and SKU. ODM (Original Design Manufacturer) means we redesign the carrier board, memory and storage combination, radio set, printer and scan engine interfaces, firmware or enclosure around your project. Both run from the same Shenzhen factory and the same firmware team: OEM lead time is 15-22 days and ODM 25-40 days including pre-compliance checks. Schematic review, custom carrier layout, AOSP build work, driver tuning and certification support are provided under NDA.

Which smart payment terminal board should I source for my application?

Answer: Eight selection rules for cross-border buyers:

• (1) Desktop and countertop terminals: DT110 / DT130 class with dual-screen output, an on-board receipt printer path and a customer-facing confirmation screen.
• (2) Self-service and unattended kiosks: SK120 / SK140 with a scan engine, a printer, GPIO release control and a watchdog tuned for unattended duty.
• (3) Retail and supermarket lanes: RC120 / RC150 with a barcode scanner, a scale link over serial and a loyalty prompt on the customer screen.
• (4) Restaurant and hospitality: RH120 / RH140 with bill splitting, tip-on-customer-screen, voice prompt of the amount and a kitchen display link.
• (5) Face recognition and biometric payment: FB150 / FB170 with on-device matching, liveness handling, secure boot, tamper inputs and key storage.
• (6) Parking, transport and ticketing: TP130 / TP150 with ticket scanning, GPIO barrier release, RS485 device control and a wide-temperature build.
• (7) Banking, government and public service: BP130 / BP160 with a stamped official receipt path, an auditable transaction ID and wired connectivity.
• (8) Private-label programmes and redesign work: OD170 / OD180 with carrier redesign, BSP porting, signed firmware, per-unit provisioning and a last-time-buy window.

What software support comes with the boards?

Answer: Every board ships with the Android image (Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher), BSP source access, driver documentation, SDK material and OTA tooling. The build supports GMS where the destination market and product category qualify; for payment-only projects that do not need Google services, the same hardware runs a full AOSP build, which also lowers unit cost. Kiosk-mode launchers, auto-start app configuration, custom boot animation, scheduled behaviour and remote device management agents are part of the standard integration work. The media stack covers the video, audio and image formats listed in the platform section, and the payment stack covers QR, barcode, NFC contactless, EMV chip and magnetic stripe paths with hardware backed key storage where the project requires it.

How do Wanlin smart payment terminal boards compare with branded terminals and x86 cashier boxes?

Answer: Because Wanlin builds the boards rather than reselling them, landed cost typically runs 42-60% below western-branded payment terminals and 25-38% below a resold retail device on equivalent radio, display and printer support. On the engineering side, this configuration brings Rockchip RK3566 quad-core SoC, 4x Cortex-A55 with an integrated NPU, 4x ARM Cortex-A55 up to 1.8GHz, 64-bit architecture and ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1, with the BSP covering Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher. Licensing cost also disappears: cashier PCs carry per-device OS licence fees and patch cycles, while the Android build carries none. The compact terminal PCBA also drops into enclosures that were designed around a larger device, which usually removes a second controller and a second power supply from the kit.

Can the board drive the displays, the printer and the full peripheral set?

Answer: Yes. 11.6-inch 1920x1080 eDP panel with projected capacitive touch for self-service payment kiosks. The peripheral stack covers thermal receipt printers with cutter control, 1D and 2D scan engines over UART, NFC and contactless readers, magnetic stripe and IC card readers, fingerprint modules, face cameras over MIPI CSI, RFID readers, SIM and TF card slots, GPIO and I2C or SPI expansion, plus a USB service path for field recovery. Audio covers speaker output, voice prompt playback, microphone capture and an intercom headset path. Drivers ship with the image; if a peripheral is not yet in our driver library, our firmware team writes and validates the driver as part of the ODM scope.

What are the MOQ, lead time, trade terms, sample policy and warranty?

Answer: MOQ is 100 pcs per model. Lead time is 15-22 days for standard configurations and 25-40 days for ODM customization. Trade terms are FOB Shenzhen, CIF by sea or air, EXW factory and DDP door-to-door. Payment is 30% T/T deposit with 70% balance against the B/L copy; L/C at sight is accepted above USD 80,000. Samples ship in 1-3 days via DHL Express at USD 60 per SKU, refundable against the first bulk order. Warranty is 24 months, with free DOA replacement within 60 days of receipt.

Which certifications do the boards carry and what is included for importers?

Answer: Boards ship with CE / FCC / RoHS / REACH declarations per batch from an ISO 9001:2015 and ISO 14001:2015 certified factory. UKCA, KC, PSE, SAA, RCM, EAC and UL 62368-1 report documentation is available on request, and NCC type approval and SONCAP import conformity documentation. For payment projects we also support the documentation set that scheme certification asks for, including secure boot configuration, tamper response description and key handling notes. We provide DoC templates, test report copies, label artwork and a pre-validated compliance package per model, which shortens importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

What customization and partnership options does Wanlin offer?

Answer: Customization scope:

1. (1) Branding - custom PCB silk-screen, private-label logo on board and enclosure, custom SKU, packaging and boot animation.
2. (2) Firmware - custom launcher, kiosk lock-down, pre-installed apps, multilingual UI packs, custom boot logo and a signed OTA channel.
3. (3) Hardware - carrier board redesign, memory and storage combinations, radio set selection, printer and scan engine interface placement, contactless antenna routing, SIM and TF slot layout and display channel selection.
4. (4) Software - AOSP build service, BSP porting, peripheral driver development, SDK modules, remote device management agent integration and API work against your own payment application.
5. (5) Delivery - DDP shipping, overseas-warehouse labelling, per-batch serial and key provisioning.

Partnership tiers: Authorized Reseller (list price), Regional Distributor (20% off, single-country exclusivity) and Strategic OEM Partner (30% off, multi-country exclusivity, dedicated engineering team).

Wanlin Global Partner Stories - Real Project References

The references below come from anonymized 2024-2026 projects across 60+ export markets; cities and figures are real, buyer names are withheld.

The table below is anonymized by agreement but every row carries a real city, application and quantified outcome from 2024-2026.

City	Application	Outcome
Bangkok, Thailand	food court self-ordering programme, 88 kiosks	order taking staff per court fell from 9 to 5 and average order value rose 21%
Seoul, South Korea	bakery chain queue programme, 420 counters	queue complaints fell 92% and the chain extended the same board to its cafe format
Nairobi, Kenya	corporate canteen network, 160 terminals	service stoppages during connectivity loss went to zero and subsidy reconciliation closed 3 hours faster per week
Lisbon, Portugal	hotel group front desk refresh, 260 terminals	check-in time fell 34% and folio corrections dropped 72% across 14 properties

Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers three partnership tiers for cross-border buyers of Restaurant and Hospitality Payment Terminal Boards:

• Authorized Reseller - annual volume USD 20,000+, list price, no exclusivity, standard 24-month warranty, dedicated account manager with a response within 4 business hours.
• Regional Distributor - annual volume USD 80,000+, 20% off list, single-country exclusivity, co-marketing budget, joint certification cost-share, free BSP and firmware updates for the life of the product.
• Strategic OEM Partner - annual volume USD 250,000+, 30% off list, multi-country exclusivity, dedicated engineering team, joint roadmap, 18-month price lock and one joint trade-show booth per year at GITEX Global, Money20/20, Canton Fair or the Hong Kong Electronics Fair in Hong Kong, China on a cost-share basis.

All partners receive free certification documentation and test report copies, custom Android image support, free DOA replacement within 60 days, per-batch serial and key provisioning, and a sample programme with USD 60 per SKU refundable against the first bulk order above MOQ.

Conclusion - How to Start Your Restaurant and Hospitality Payment Terminal Boards Sourcing Today

Wanlin Group's 2026 smart payment terminal export program is open to B2B buyers, regional distributors, cross-border traders and OEM/ODM partners in Nigeria and 60+ destination markets. To start a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, contact the export team below. Sample orders ship within 1-3 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 15-22 days, and Strategic OEM Partner applications are reviewed quarterly.

We invite Nigeria buyers, export traders and trading companies to build long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the AndroidSBC brand. Wanlin is the manufacturer behind the smart payment terminal board line, the SMT lines and aging rooms behind every batch, and this export program. Let's build the Restaurant and Hospitality Payment Terminal Boards supply chain together.

---

Model: RK3566-RH170
Platform: Rockchip RK3566 quad-core SoC, 4x Cortex-A55 with an integrated NPU
CPU: 4x ARM Cortex-A55 up to 1.8GHz, 64-bit architecture
GPU: ARM Mali-G52 2EE GPU, OpenGL ES 3.2 / Vulkan 1.1
Render / security: Mali-G52 2EE render path with the on-chip NPU handling QR decode assist and lightweight face detection
Video: Hardware decode up to 4K@60fps across H.265, VP9 and H.264, with 1080P@30fps encode for audit capture
Camera input: MIPI CSI camera input for barcode imagers, face payment cameras and document capture
Memory: 4GB LPDDR4X
Storage: 32GB eMMC
OS: Android 14.0 with OTA upgrade, per-unit provisioning and a locked launcher
Display and touch: 11.6-inch 1920x1080 eDP panel with projected capacitive touch for self-service payment kiosks
Audio: Speaker output with microphone input, voice prompt playback and a scan beep channel
Network: Dual-band WiFi with Bluetooth 5.0, 10/100M Ethernet and an optional 4G LTE module
Interfaces: 1x MIPI DSI or LVDS display with capacitive touch, 1x HDMI secondary display, 1x MIPI CSI camera, 3x USB Host with 1x USB OTG, 1x RS232 with TTL UART option, 1x thermal printer head and cutter control, 1x scan engine UART, GPIO, I2C, SPI, PWM and ADC expansion
Power: 12 V DC input with an onboard buck stage, a separate supply path for the thermal printer head, RTC retention and scheduled power on/off for unattended duty
Field duty: Continuous unattended duty with hardware watchdog, RTC retention, scheduled power on/off and auto power on after a mains cut; a wide-temperature build is available for outdoor kiosks
PCB: Smart payment terminal PCBA with onboard LPDDR and eMMC, display and touch interface, camera input, printer and scan-engine headers, SIM and TF card slots, Ethernet and a USB service path
Cert: CE / FCC / RoHS / REACH with EMV and PCI-relevant documentation support
MOQ / Lead / Warranty: 100 pcs / 15-22 days / 24 months
FOB Shenzhen reference price: $90.00 per piece at MOQ 100 pcs
Region: Nigeria
Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

• Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Manufacturer: Wanlin Group / Brand: AndroidSBC / Site: www.androidsbc.com
• Export service: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com
• Form factor: Restaurant and Hospitality Payment Terminal Boards / Platform: Rockchip RK3566 quad-core SoC / PCB: Smart payment terminal PCBA with onboard LPDDR and eMMC, display and touch interface, camera input, printer and scan-engine headers, SIM and TF card slots, Ethernet and a USB service path
• Country compliance for Nigeria: NCC type approval and SONCAP import conformity documentation